Our Automotive Electronics are designed to improve your driving experience! 

This module is designed to interface a variety of transmission types or inputs to our SMART 2 display. Using this module you can add our unique display to your vehicle when using a sequential type gear box, regular automatic transmission, or other as long as you have signal switches or solenoids used for the commanded gear changes. We can custom configure this to suit your needs. It includes 8 inputs, configurable with a variety of shift patterns. If all 8 aren't needed, we will configure one as a display brightness input to dim the display at night time. This module is small in size, measuring just 3"x2" and includes automotive grade connectors. Rated to a max voltage of 20VDC on any input pin.

Our new innovative SMART 2 gear display is a small 1.25" square dash mountable display, uses a 5x7 led dot matrix type display available in 2 colors. We have 2 optional enclosure types, stylish square, or standard 2" round gauge style enclosure.

Available 'Display Module Interface' options:

• 5 speed sequential plus reverse plus arm
  This interface has 5 separate gear inputs, only one high at a time, indicating gears 1-5
  This interface has a reverse gear input, high when in reverse
  This interface has an arm switch, when not set high will result in neutral
  Neutral will be the gear if none of the forward or reverse gears are selected
  This interface includes a display dimmer input that will dim the display when input is high

• Custom Interface
  This interface option allows you to send us your requirements and we will custom program to meet your needs

SMART 2 Gear Display Module    Choose Display Module Interface: Choose Display LED Color 5 speed sequential plus reverse plus arm Custom Interface Choose Optional Display and Enclosure Type: NO DISPLAY SMART2 display without enclosure (add $60.00) SMART2 display with SQUARE 1.25" Enclosure (add $75.00) SMART2 display with 2" GAUGE Enclosure (add $80.00) Choose Display LED Color for SMART 2 display: NONE Red LED Display Blue LED Display Choose Wiring Harness Type: DIY Connector & Pins only (requires crimping) With 24" Plug in flying lead harness (add $10.00) With 60" Plug in flying lead harness (add $20.00)

IN STOCK

Disclaimer: Forced Four, and the employees of Forced Four are not responsible for any damage or personal injury caused by the misuse, improper installation, product glitches, or product failures.  By installing this product and using this product, you are agreeing to this disclaimer. Forced Four will stand behind the quality of our products, and will try to correct any issues you may have while using this product, but are in no way liable for what this product may do.

Added to catalog on 12/10/21

Photos!